Shopping Cart

Out of Stock
Type 2551 Magmeter
Type 2551 Magmeter
1 options available
Stock 10000
Code
PS
(includes VAT)
Description

Senzor

Signet 2551 Magmeters offer many output options of frequency/digital (S3L) or 4 to 20 mA which are available on both the blind and display versions. The frequency or digital (S3L) sensor output can be used with Signet's extensive line of flow instruments while the 4 to 20 mA output can be used for a direct input to PLCs, chart recorders, etc. Both the 4 to 20 mA output and digital (S3L) sensor interface is available for long distance signal transmission. An additional benefit is the empty pipe detection which features a zero flow output when the sensors are not completely wetted. Also, the frequency output is bi-directional while the 4 to 20 mA output can be set for uni- or bi-directional flow using the display or the 3-0250 USB to Digital (S3L) Configuration / Diagnostic set-up tool which connects to PCs for programming capabilities.

In addition the display version of the 2551 Magmeter is available with relays and features permanent and resettable total values which can be seen on the display. Also, the display contains multi-languages with English, Spanish, German, French, Italian and Portuguese menu options.


Flow:
  • Installs into pipe sizes: DN15 to DN900, 0.5 to 36 in
  • Operating range: 0.05 to 10 m/s, 0.15 to 33 ft/s

  • Max Pressure rating: PP 10.3 bar @ 25 °C, 150 psi @ 77 °F
  • Power Source:  
    Frequency: 5 to 24 VDC, 15 mA max. 
    Digital (S³L): 5 to 6.5 VDC, 15 mA max.

  • Compatibility: 8900, 9900, 9900-1BC, 9950
  • *Only Signet installation fittings

 

The 9900 Transmitter

Fot at-a-glance visibility, the 9900 Transmitter features a large auto-sensing backlit display, "dial-type" bar graph and relay and warning LEDs. The intuitive menu system is consistent with processPro and ProPoint transmitters, assuring you of a quicker and easier installation. The optional Relay, Direct Conducttivity/Resistivity, H COMM and Batch plug-in modules offers ease of use. The PC COMM configuration tool allows you to easely set-up, review, save and load all modifiable parameters. The unit can be used with default valves for quick and easy programming or can be customised with labelling, ajustable minimum and maximum dial settings, and unit and decimal measurement choices. The versatile device also allows third-party 4 to 20 mA signals to be used as an input (optional 8058 module required).

The 9900 Transmitter, a member of Signet's line of SmartPro  instruments, provides a single-channel interface for all Flow, pH/ORP, Conductivity/Resistivity, Salinity, Pressure, Temperature, Level, Dissolved Oxygen, Turbidity, Batch and other applications.

The 9900 is available in Panel Mount. And  runs on 10.8 to 35.2 VDC power (24 VDC nominal), and can power certain sensors on loop power.

Two dry-contact relays

In addition to the standard programmable Open Collector output in the base unit, the Panel Mount version of the 9900 has a slot for an optional Relay Module, which adds two programmable dry-contact relays. The Open Collector output in the base unit uses the Relay.

Dry-contact relays are electromechanical switches with a moving contact armature.

They are suitable for many general-purpose applications, AC or DC, including AC loads up to 250 V. Install RC Filter Kits, 3-8050.396, on relays used to switch motor or inductive loads.

 ● Two (2) SPDT dry-contact relay (DCR) inputs

 ● User programmable

 ● 250 V, 5 A maximum resistive loading (AC).

 ● Can switch line voltage (typically 120 to 240 VAC)

 ● Can switch DC voltage (< 30 VDC @ 5A)

 4 to 20 mA Output Module adds an additional 4 to 20 mA loop output to a Signet 9900 Transmitter

 ● 4 to 20 mA Output Module can be powered using Loop Power or DC Power in the 9900 base unit.

 ● Independent settings for the loop currents of the Output Module and 9900 base unit (Error, Loop Adjustments, etc.).

 

Reviews

No reviews have been written for this product.

Write your own review